FRETS.NET

William F.Eden's Discussions (620)

Search Forum

View

Discussions Replied To (601) Replies Latest Activity

"Why don't you just cut the neck off and make a new neck& fret board with a morti…"

William F.Eden replied Jul 30, 2009 to Reset Help

 6 Aug 3, 2009
Reply by Michael Kelly

"Michael You can buy a new top for & 70.00 or less on the enternet and do it your…"

William F.Eden replied Jun 30, 2009 to Fell into fire pit, fell on Martin guitar, bounced.

 13 Jun 30, 2009
Reply by Antonio Cotichini

"If it's worth fixing you need to put a new top on it .If it has that much damage don…"

William F.Eden replied Jun 29, 2009 to Fell into fire pit, fell on Martin guitar, bounced.

 13 Jun 30, 2009
Reply by Antonio Cotichini

"I can't remember how many sales those Wives have cost me.I don't know what you guys…"

William F.Eden replied Jun 24, 2009 to wives versus guitars

 26 Jun 26, 2009
Reply by Bob Gaddis

"I used to have that problem ,And I found out that I was putting to much pressure on…"

William F.Eden replied Jun 24, 2009 to Guitar Finishing Flaws

 2 Jun 24, 2009
Reply by Everett Stone

"There is a substance you can use but it is very hard to get it is 50%Hydrogen Peroxi…"

William F.Eden replied Jun 23, 2009 to How to Clean soundboard scrapes before repairing ?

 4 Jun 24, 2009
Reply by Jerry Ryan

"Go to home-depo in the sand paper section you will find the right pads.I like the Ma…"

William F.Eden replied Jun 23, 2009 to Removing Shiny Poly Finish from back of Neck

 10 Jun 30, 2009
Reply by Randy King

"Loosen the trust rod and then loosen the fret board about half ways down.on the nut…"

William F.Eden replied Jun 21, 2009 to Truss Rod Problem

 3 Jun 21, 2009
Reply by William F.Eden

"Mike Help your brother Luthiers and buy a good hand made F model. You can always tak…"

William F.Eden replied Jun 19, 2009 to The Kentucky MIJ Mandolins

 20 Jul 13, 2009
Reply by mike carne

"Take Rusty's Advice and remove the fret board. Because you will likely find out in t…"

William F.Eden replied Jun 16, 2009 to Neck removal problem

 10 Jun 19, 2009
Reply by Colin Brown

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service