FRETS.NET

Hello folks,

I'm restoring a mid 30s L-00 and the top is in very bad shape, but salvageable.  I've removed the top and plan to remove the braces and reglue them but it is not possible to tell what the original top radius may have been.  I'd love some input on where this information may be found or some informed ideas on 30s Gibson top radii.  Thanks!

Views: 2034

Reply to This

Replies to This Discussion

Yes the one I done over was  #9595 But the one I had only had the one brace under the neck end but I added a nother one.Bill............

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service