FRETS.NET

It may be purely coincidental, but in the last month I have come across 2 Martins where the heel has separated slightly from the body. It’s like the joint was loose from the factory and held in place by glue instead of a good fit.

Wondering if anyone else has come across this, and whether there’s a better strategy for repair besides resetting the neck.

Views: 294

Reply to This

Replies to This Discussion

Maybe there is a screw to tighten?

Nope, these were both models with dovetail joints. One is a 000-28EC. I can’t remember the other model, maybe an OM-28?

The EC is with me now. The other was the original owner, so I referred him to the factory for a warranty repair.

Here's a picture of the joint.  It kind of looks like a glue joint failed, perhaps without much glue in it.

It happens occasionally, and a loose heel is the current test for whether a reset would qualify as a warranty repair for the original owner.

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service