Martin dovetail neck joints coming loose?
It may be purely coincidental, but in the last month I have come across 2 Martins where the heel has separated slightly from the body. It’s like the joint was loose from the factory and held in place by glue instead of a good fit.
Wondering if anyone else has come across this, and whether there’s a better strategy for repair besides resetting the neck.
Wondering if anyone else has come across this, and whether there’s a better strategy for repair besides resetting the neck.
Views: 301
Replies to This Discussion
-
Permalink Reply by Roger Häggström on
-
Maybe there is a screw to tighten?
-
Permalink Reply by Eric Gleason on
-
Nope, these were both models with dovetail joints. One is a 000-28EC. I can’t remember the other model, maybe an OM-28?
The EC is with me now. The other was the original owner, so I referred him to the factory for a warranty repair.
-
-
Here's a picture of the joint. It kind of looks like a glue joint failed, perhaps without much glue in it.
-
Permalink Reply by Frank Ford on
-
It happens occasionally, and a loose heel is the current test for whether a reset would qualify as a warranty repair for the original owner.
© 2024 Created by Frank Ford.
Powered by
