Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
Neck reset 1962 Gretsch 6120 questionHi everyone!Does anyone have any experience taking the neck off of one of these guitars? There was a bolt behind a black plastic circle on… Started by Ted Kritikos in Luthier Talk |
3 |
Feb 18, 2010 Reply by Mark A. Kane |
Small nick repairI have a small nick (about 1/8" long, 1/16"wide) through the finish on my otherwise pristine tope of my acoustic guitar. It goes through to… Started by Alan Cangemi in Luthier Talk |
8 |
Feb 17, 2010 Reply by Ned Knepp |
STRING REPLACEMENT QUESTIONI'm somewhat inexperienced at replacing strings and would appreciate some help. I have a set of Daddario EJ45C classical guitar strings. T… Started by Scott Stambaugh in Luthier Talk |
11 |
Feb 16, 2010 Reply by Scott Stambaugh |
Opinions about sanding stationI'm contemplating buying the Luthiers friend sanding station from StuMac, and I wondered if anybody here uses one, and if they're as good a… Started by Grahame Myers in Luthier Talk |
15 |
Feb 15, 2010 Reply by Grahame Myers |
small guitar shop CNC?I am looking to get some feedback from my fellow guitar builders that are using some of the new small linear type CNC machines for neck and… Started by Bill Asher in Luthier Talk |
10 |
Feb 13, 2010 Reply by Jay Gordon |
Bending mahoganyI've built 4 guitars now but all have had rosewood sides. Is there anything special I should know about mahogany? How long should I soak… Started by Jack Lord in Luthier Talk |
4 |
Feb 13, 2010 Reply by Jay Gordon |
Saddle sizeI have really small fingers and my acous/elec Yamaha APX700 is brand new, got it 2wks ago. The guitar was perfect when I got it, but I gues… Started by amae in Luthier Talk |
5 |
Feb 12, 2010 Reply by Pierre-Antoine Roiron |
Tools for stainless steel fretwireA guy came in with two guitars, both fretted with gray stainless steel frets (supposed to be the toughest ones). The fretting is not the be… Started by Bob Steinarsson in Luthier Talk |
9 |
Feb 11, 2010 Reply by Bob Steinarsson |
Reverse printing / heat transfer label question - lost linkI've lost the link on how to do this, does anyone know what the link is? It involves reverse printing a label on special paper(?), then… Started by Mac Walker in Luthier Talk |
4 |
Feb 10, 2010 Reply by Mac Walker |
How would i increase break angle on a pinless bridge?I've read on ramping pin slots on pinned bridges... my UST is suffering a tad of inbalance but the saddle height's low with a great action.… Started by Hann in Luthier Talk |
19 |
Feb 10, 2010 Reply by Pierre-Antoine Roiron |
© 2024 Created by Frank Ford. Powered by