Kerfing jig

[John]

This goes out to the builders. 

I've been using a bandsaw sled with a spring loaded indexing pin that I made a few years ago ....it works fine. I have friend that makes 2 sided kerfing with a table saw jig, I like it better but I hate changing blades. This is why I have 2 bandsaws and 2 table saws.... btw

I'm thinking of getting a table saw blade sharpened in a V shape and switchcutting the kerfing so the V is always on the inside. Any thoughts on this?

[Ned Knepp]

John, how about a picture or two of you jig.

Are you thinking that a V shaped slot will allow you to cut fewer slots? 

[Kerry Krishna]

 Ned, I am thinking that John is thinking that it will make the kerf way more flexible. If that is your though John, I totally think that is what will happen... 

[John]

Sorry life got hectic for a few weeks. Ned here's a link to my blog with the kerfing jig I made.  

http://gtrdoc.blogspot.ca/2013/09/kerfing-jig.html

The V slot seems like a way to leave more gluing surface on the kerfing and more flexibility at the same time.

John

[Kerry Krishna]

Looks good John!

[John]

I found this, Frank might know about the blades.