Forum Discussions (4,419)
| Discussions | Replies | Latest Activity |
|---|---|---|
Great mother of toilet seat!! Where do I find this stuff?I am looking to buy some thin mother of pearl sheeting, but do not know where to go. I have checked with some companies that sell veneer (f… Started by Matt Haugen in Luthier Talk |
11 |
Oct 30, 2009 Reply by Rob Mercure |
Curbow bass electronics problemHelp!! My Cort Curbow bass has developed a strange electronics problem. Its output has weakened so much I have to crank up the amps to thei… Started by Alexander López in Luthier Talk |
6 |
Oct 29, 2009 Reply by Rob Mercure |
Static noises from new scratchplate .Hi Guys , I have just installed new "F" custom shop pickups on a strat copy, using a new "M.O.T.S."scratchplate.The thing crackles and tick… Started by Len Biglin in Luthier Talk |
12 |
Oct 28, 2009 Reply by Russell Vance |
Dreadnaught project / Back seamThe back strip on this 1970mahogany dreadnaught has separated from the back plate on one side by about .006". See pic attached. The strip t… Started by Brian Farrell in Luthier Talk |
5 |
Oct 27, 2009 Reply by David Houchens |
Kerfing the BridgeKerfing the linings is meant to help the vibrations in the top.How much difference would kerfing the Rosewood bridge make?Keep the bone in… Started by John Cadd in Luthier Talk |
20 |
Oct 27, 2009 Reply by John Cadd |
Little guitarsI just finished my first small (single 0) guitar. I was blown away by the tone and volume of this little guitar. I will be building more of… Started by David Houchens in Luthier Talk |
32 |
Oct 26, 2009 Reply by David Payne |
Regal/Dobro Neck resetI recently picked up a 30's vintage Regal/Dobro, Model 27 I think it's called. This wood-bodied resonator has a half-stick set up, with the… Started by onewent in Luthier Talk |
7 |
Oct 26, 2009 Reply by onewent |
I found a Vega VDX-84 for LOW money this Is a Guitar not a Banjothis plays grate needs a saddle and some lower the stings,I am know martin took over in 1970 I can't find info before or after. So the guys… Started by Mark Naro in Luthier Talk |
3 |
Oct 26, 2009 Reply by Rob Mercure |
Bridge RotationA late 70's Guild has come into our shop for it's second neck reset in 18 mos. The bridge continues to rotate (pull forward)-despite adding… Started by Stuart Horsman in Luthier Talk |
18 |
Oct 26, 2009 Reply by Brian Farrell |
Double x brace bridge plate removal?Vintage Gibson with a chipped out bridge plate. Multiple loose braces, a top crack and the back is peeling up a bit puts replacing the brid… Started by STGuitarworks in Luthier Talk |
6 |
Oct 26, 2009 Reply by STGuitarworks |
© 2025 Created by Frank Ford.
Powered by
