Forum Discussions (4,419)
| Discussions | Replies | Latest Activity |
|---|---|---|
Table saw crosscut sled for fret slottingHi, all -- After years of buying slotted fingerboards, I decided it's finally time to start slotting my own. I'm ordering the StewMac table… Started by Kevin Canney in Metalworking, Machining, Tool & Fixture Making for Luthiers |
4 |
Nov 8, 2018 Reply by Russell Vance |
Profile picsCom'on guys, why do most of you all have the same default profile pic. Having a personalized pic would at least let others know a little a… Started by Charlie Sanders in Luthier Talk |
14 |
Nov 7, 2018 Reply by Ron Ellison |
brass insert searchhhhhhhhhhhhhhhhhs-l1600%20%281%29.jpg looking for these exact m3 inserts. dont need the screws. this photo is from ebay. cant find these ex… Started by Nick - p in Luthier Talk |
6 |
Nov 3, 2018 Reply by Russell Vance |
Making use of junk mandolinHi, I bought a couple weeks a junk mandolin off from eBay a couple of weeks ago. my question is this since my luthier buddy says the instru… Started by Kirk Mason in Luthier Talk |
1 |
Nov 2, 2018 Reply by Jon Whitney |
Looking for info contained in 1920s/30s Jobber catalogsA few here will remember that I am hardcore into the 20s/30s Kay Kraft and Stromberg/ Voisinet guitars. While the collecting is going we… Started by Kerry Krishna in Luthier Talk |
0 | Oct 29, 2018 |
Fender Biflex truss rod replacementI've got a non-functional truss rod on a 1994 Fender Strat here. I've done the whole 'pull the walnut plug and replace the truss rod nut' s… Started by Ian Pender in Luthier Talk |
3 |
Oct 26, 2018 Reply by Charlie Sanders |
Problem bending sidesI just attempted to bend some Mahogany sides, with a cutaway, thickened to .87-.90 in a Fox style bender. When I took them out there was wh… Started by Charlie Sanders in Luthier Talk |
7 |
Oct 26, 2018 Reply by Charlie Sanders |
looking for binding source for 74 guildHey all Im looking for binding used on an aging 74' Guild F50 for the neck its w/b/w/b/w any leed wound be most appreciated Started by peter meyer in Luthier Talk |
1 |
Oct 25, 2018 Reply by Mike Kolb |
Oud neck break: opinions soughtHi, all! A customer of mine brought this back from Egypt. Unfortunately, and inevitably, it was damaged in the hold of the plane. Wondering… Started by Keith Somerville in Luthier Talk |
6 |
Oct 22, 2018 Reply by Keith Somerville |
Resource for wholesale celluloid tortoise?I wasn’t seeing celluloid tortoise sheet stock, now a couple vendors have it for sale at retail prices. While it’s available I’d like to gr… Started by Mike Cornwall in Luthier Talk |
2 |
Oct 21, 2018 Reply by Mike Cornwall |
© 2025 Created by Frank Ford.
Powered by
