FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"So have I, Paul, but it's not necessary to get a saddle nearly that hot for it to le…"

Greg Mirken replied Jun 24, 2010 to removing a glued long saddle

 14 Jun 25, 2010
Reply by Russell Vance

"You should try to heat it up and yank it out first. I use a mask that fits around th…"

Greg Mirken replied Jun 23, 2010 to removing a glued long saddle

 14 Jun 25, 2010
Reply by Russell Vance

"I use a Fein Multitool with a metal cutting blade and cut flush against the fingerbo…"

Greg Mirken replied Jun 23, 2010 to Another neck reset question

 6 Jun 26, 2010
Reply by Greg Mirken

"You need to use a narrow file on narrow frets. The wide one won't put enough arch on…"

Greg Mirken replied Jun 23, 2010 to What to do about bar frets?

 12 Jul 5, 2010
Reply by Rick Homan

"Yike. That first picture looks more like a bad repair, or the brace was never clampe…"

Greg Mirken replied Jun 19, 2010 to ES-175 sinking top- another one

 4 Jun 20, 2010
Reply by Pierre-Antoine Roiron

"I've seen your question on 3 forums now. You've gotten a handful of responses all sa…"

Greg Mirken replied Jun 13, 2010 to Question about neck angle of a new Recording King

 12 Jun 17, 2010
Reply by Gerardo Piero Pavone

"If no one comes up with a better idea you may have to remove the fingerboard or cut…"

Greg Mirken replied Jun 11, 2010 to Help with a neck reset

 13 Jul 3, 2010
Reply by D. Scott Nettleton

"I hope someone chimes in with more helpful advice. Gibson has used odd neck joint me…"

Greg Mirken replied Jun 11, 2010 to Help with a neck reset

 13 Jul 3, 2010
Reply by D. Scott Nettleton

"I don't see the need to respray. As you brush lacquer in the missing chip wet the ed…"

Greg Mirken replied Jun 10, 2010 to Finish lifted

 6 Jun 11, 2010
Reply by Jack Lord

"One of the ways a manufacturer makes a guitar that can sell for $100 is to drastical…"

Greg Mirken replied Jun 8, 2010 to Question regarding Neck Resetting

 1 Jun 8, 2010
Reply by Greg Mirken

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service