FRETS.NET

This is a small Washburn that is stamped "1897 STYLE      NEW MODEL"  Serial number 168075 is hand written on the label, and also stamped into the end of the peghead.  The number 145 is also stamped into the end of the peghead, just above the S.N.

The bridge is marked "DURKEE PATENT BRIDGE"

The ivoroid binding has shrunk, and pulled away from the edge of the end of the fingerboard.  I looks as though hide glue was used originally.   Would you stick (so to speak) with the hot hide glue, or consider Duco, or?

George

Views: 296

Attachments:

Reply to This

Replies to This Discussion

More pictures
Attachments:

Just my 2 cents...I think hot hide glue or titebond would do well, on the theory that there's a zillion little miniature slivers of wood left on the binding and they should present 'wood-to-wood' glue surfaces.  

If the binding (bond-side) has been cleaned or otherwise devoid of the old wood, then it probably should be treated as a new installation and Weld-on would be better. 

What an amazingly gorgeous axe. It's been years since I have seen a guitar in as good shape as that. Congrats!
Hide glue

Thanks for the input, everyone. 

I have always used Duco cement for ivoroid binding in new builds, but I wasn't sure how it would react with the very old ivoroid binding.  I guess it makes sense to stay with the hot hide glue since that's what seems to have been used originally.

This guitar is cross braced, which is a first for me with Washburn / Lyon &Healey.

George

Either hot hide glue or Titebond would be the glue to use, no Duco cement on an old instrument, it will damage the finish.

 

Jim

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service