Great stuff, thanks! Tom
Very enjoyable. Got a few ideas there. The capacitor videos will be a good reference for my customers. Thank you.
Lots of good material there, guys!
You are very welcome Russell and thanks for the thanks too - much appreciated!
Yikes... I'll swap you a year of lawn-mowing & snow shoveling for one of your saddle mills!!!
We like the mills too and especially like being all set-up with vac pump and a dedicated bench with a mill on it. When we need to improve a saddle slot, say level the bottom for UST balance issues, etc. it's a several minute task to do. Plugging and reslotting is a piece of cake too. It takes all the drama out of the operations and that's a pretty welcome thing.
Thanks all - We're working on another series right now on humidity, it's effects on guitars, and tips for controlling it. May be a month or so before they're ready. I've been running controlled comparisons and taking measurements with various case humidifiers for a few weeks now, and will likely be another few weeks before I have enough data.
Here's a teaser though, a little time lapse snippet of a top drying out.
... think I'll go check the humidifiers in my guitar cases right now... It's been a while.