Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
Saddle HeightHey all. I'm having an issue where despite having a perfect neck angle on the guitar, the saddle height is fairly low in order to get just… Started by mr smits in Luthier Talk |
22 |
Jan 26, 2020 Reply by Paul Verticchio |
Hello All!Hi Folks, just saying hello. I'm usually pretty busy between the shop, and life, but appreciate Frank accepting my membership request. T… Started by Kirby Francis in Luthier Talk |
0 | Jan 22, 2020 |
How Should I Adjust the Action on a: Eko Ranger XII VR EqHow Should I Adjust the Action on a: Eko Ranger XII VR Eq See guitar here: https://www.ekoguitars.it/en/acousticguitars/Vintage-Reissue-Se… Started by Norwegian_Wood in Luthier Talk |
8 |
Jan 21, 2020 Reply by Ray NAYLOR |
Warping ebony fingerboardAbout a year ago, I replaced an ebony fingerboard on a Beard resophonic. Pretty standard install... the board over the neck was glued and… Started by Mike Kolb in Luthier Talk |
21 |
Jan 21, 2020 Reply by Mike Kolb |
Scale lengthI just bought a wreck of a Terada TW90 (dreadnought), which is considered as a very good japanese from the 70s. The guitar may need a new f… Started by Bob Steinarsson in Luthier Talk |
6 |
Jan 19, 2020 Reply by Mark McLean |
Strap Pin at HeelThis question is the opposite of what is usually posted. I dislike strap pins at the heel and wonder how to plug the hole left by the screw Started by John Sobczak in Luthier Talk |
13 |
Jan 16, 2020 Reply by Nathan Laudenbach |
Segmented saddle bone and "turbo plugs" revisitedI made a fuzz on this board some time ago enthusiastically telling about the "amazing things" I've just discovered back then. Now time has… Started by Roger Häggström in Luthier Talk |
0 | Jan 11, 2020 |
Experience with Rubner machine heads?Hello All,A student showed up with a set of Rubner machines that looked quite nice, though not just to my taste in appearance. They seemed… Started by Brian Burns in Luthier Talk |
3 |
Jan 10, 2020 Reply by Roger Häggström |
Fender Tele lacquer drop fill.Hi All, Another challenging year is on its way - we here are seeing an increase in finish problems on new and near new instruments due to… Started by Russell Vance in Luthier Talk |
4 |
Jan 5, 2020 Reply by Russell Vance |
Something to worry about?My Orville Les Paul Junior has some lacquer stress cracks at the neck joint. What's the best approach to this repair? Thanks, Jim Started by Jim Yates in Luthier Talk |
9 |
Jan 4, 2020 Reply by Jim Yates |
© 2025 Created by Frank Ford.
Powered by
