Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
Rise in back stripI have a small problem with a zipperd back strip when I cut the channel for it I got it a tad to big. So I sliped a piece 1/28 maple veneer… Started by William F.Eden in Luthier Talk |
11 |
Mar 16, 2009 Reply by Ned Knepp |
Any tips on Bending Spalted Maple sides?well I am getting ready to build a couple Guitars just thought I would ask before I got in to things like bending anyone with experience be… Started by FRANK in Luthier Talk |
23 |
Mar 16, 2009 Reply by Bob Webster |
Not jeebus in a tater chip..howeverThought I'd share this w/ya'll.While testing stain on curly maple I turned the piece of wood over to find what seems to be a miraculous ico… Started by Tim Mace in Luthier Talk |
1 |
Mar 15, 2009 Reply by Tim Mace |
Tell the customer or no?I have a guitar in for action adjustment. It is a strat type guitar with bolt on neck. In adjusting action I have found that when I get to… Started by Mike Baker in Luthier Talk |
8 |
Mar 15, 2009 Reply by Mike Baker |
Froggy Bottom truss adjustment.Does any one know how to adjust a truss rod on a froggy bottom guitar using common tools?Len Started by Len Biglin in Luthier Talk |
4 |
Mar 15, 2009 Reply by Len Biglin |
How to shim a saddle ( follow up to my previous)I have a Norman ST 40 with a Tusq or Micarta saddle that I need to shim. Any ideas about what type of material to use? Started by Wayne Walker in Luthier Talk |
9 |
Mar 15, 2009 Reply by Wayne Walker |
CA dent repairI'm still learning.... I used tips from here on repairing small dings in a soundboard with superglue. I cleaned the dents with naptha, fill… Started by Jerry Ryan in Luthier Talk |
5 |
Mar 15, 2009 Reply by FRANK |
Repairman QuestionFor all you repair guys out there, do you come across people who are interested in doing a fretless conversion often? By that I mean are th… Started by Colin Brown in Luthier Talk |
14 |
Mar 15, 2009 Reply by FRANK |
Router tear outWhile routing the channel for my binding on my sound board (sitka spruce) I had a fairly large tear out. How is the best way to repair. I d… Started by leparker in Luthier Talk |
8 |
Mar 14, 2009 Reply by FRANK |
NecksI recently bought an Epiphone flat top on ebay that had the head stock broken off. I purchased to practise repairs. I was going to remove t… Started by Larry Parker in Luthier Talk |
9 |
Mar 14, 2009 Reply by Bob Gaddis |
© 2025 Created by Frank Ford.
Powered by
