Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
I need someone to make a few oversized MartinPyramid bridges for me...I need two ( one would do for now) 15% oversized ebony pyramid bridge , with no pin holes or saddle slot cut. I imagine there are sever… Started by Kerry Krishna in Luthier Talk |
5 |
Feb 12, 2020 Reply by jbbancroft |
Saddle HeightHey all. I'm having an issue where despite having a perfect neck angle on the guitar, the saddle height is fairly low in order to get just… Started by mr smits in Luthier Talk |
22 |
Jan 26, 2020 Reply by Paul Verticchio |
Hello All!Hi Folks, just saying hello. I'm usually pretty busy between the shop, and life, but appreciate Frank accepting my membership request. T… Started by Kirby Francis in Luthier Talk |
0 | Jan 22, 2020 |
How Should I Adjust the Action on a: Eko Ranger XII VR EqHow Should I Adjust the Action on a: Eko Ranger XII VR Eq See guitar here: https://www.ekoguitars.it/en/acousticguitars/Vintage-Reissue-Se… Started by Norwegian_Wood in Luthier Talk |
8 |
Jan 21, 2020 Reply by Ray NAYLOR |
Warping ebony fingerboardAbout a year ago, I replaced an ebony fingerboard on a Beard resophonic. Pretty standard install... the board over the neck was glued and… Started by Mike Kolb in Luthier Talk |
21 |
Jan 21, 2020 Reply by Mike Kolb |
Scale lengthI just bought a wreck of a Terada TW90 (dreadnought), which is considered as a very good japanese from the 70s. The guitar may need a new f… Started by Bob Steinarsson in Luthier Talk |
6 |
Jan 19, 2020 Reply by Mark McLean |
Strap Pin at HeelThis question is the opposite of what is usually posted. I dislike strap pins at the heel and wonder how to plug the hole left by the screw Started by John Sobczak in Luthier Talk |
13 |
Jan 16, 2020 Reply by Nathan Laudenbach |
Segmented saddle bone and "turbo plugs" revisitedI made a fuzz on this board some time ago enthusiastically telling about the "amazing things" I've just discovered back then. Now time has… Started by Roger Häggström in Luthier Talk |
0 | Jan 11, 2020 |
Experience with Rubner machine heads?Hello All,A student showed up with a set of Rubner machines that looked quite nice, though not just to my taste in appearance. They seemed… Started by Brian Burns in Luthier Talk |
3 |
Jan 10, 2020 Reply by Roger Häggström |
Fender Tele lacquer drop fill.Hi All, Another challenging year is on its way - we here are seeing an increase in finish problems on new and near new instruments due to… Started by Russell Vance in Luthier Talk |
4 |
Jan 5, 2020 Reply by Russell Vance |
© 2025 Created by Frank Ford.
Powered by
