Forum Discussions (4,419)
| Discussions | Replies | Latest Activity |
|---|---|---|
Method for cleanly cutting back fretboard.I am needing to adjust the front edge of a strat's nut slot to accommodate an LSR roller nut. How do I make the cuts parallel and clean--I… Started by Jeff Smith in Luthier Talk |
18 |
May 23, 2009 Reply by Mike Kolb |
Neck block glue failureNeck block glue failure is splitting one side of top near sound hole. Not the more commom 2 sides. I can slip a gauge tool into about 1 inc… Started by Michael in Luthier Talk |
9 |
May 23, 2009 Reply by thefishinmusician |
guitar building tools must take allI am going back to my first Love I was Trained years ago as a Concert Guitarist i am asking $35,000 for all the exotic hard woods /tools bu… Started by FRANK in Luthier Talk |
7 |
May 23, 2009 Reply by Jerry Mercer |
Intonation QuestionI was checking the intonation on a new guitar I just received. All strings intonate well when checking using the 12th fret harmonic and the… Started by gordon in Luthier Talk |
10 |
May 22, 2009 Reply by danove |
'68 Martin D-18, install adjustable truss rod or not? Opinions..?Hi! I have just restored a '68 D-18. The guitar was "upgraded" a long time ago; scalloped braces, enlarged soundhole, replacement ebony fin… Started by peter in Luthier Talk |
8 |
May 21, 2009 Reply by peter |
page numbersI can see pages 1 to 7--then 52 to 54.But what`s in between? Or have I got a blind spot?Somebody pull a lever please. Started by John Cadd in Luthier Talk |
1 |
May 21, 2009 Reply by Ned Knepp |
Recomended source for good quality bone classical saddleHello, I would like to put a bone saddle in a Yamaha CG151C. Is there anyone that you folks know of or can direct me to that may be a good… Started by For-The-Luv-That-Playing-Brings in Luthier Talk |
6 |
May 21, 2009 Reply by Ron Frazier |
Implications of a High Saddle/Shallow Neck AngleMy main steel-string guitar is a cedar/mahogany OM, built very lightly and setup for light-touch fingerstyle play. I've previously posted h… Started by Brent Hutto in Luthier Talk |
12 |
May 20, 2009 Reply by Tim Mace |
Kay Peghead logo. Is this a kelvinator logo?I have come across this old logo and I would like to know if it has a proper name assigned to this design. It appears to be tin, stamped wi… Started by Matt Haugen in Luthier Talk |
2 |
May 19, 2009 Reply by Tim Mace |
Electric glue potsI would like to try using hide glue, but the only supplier I can find in the UK for an electric glue pot is Touchstone Tonewoods who want £… Started by David Gibbon in Luthier Talk |
28 |
May 18, 2009 Reply by Steve Baker |
© 2025 Created by Frank Ford.
Powered by
