FRETS.NET

Hi, I have a guitar that Iam cleaning and installing new strings.It has a floating bridge and a tailpeice with surface rust.Theres more rust on the outside than the underside. I use Flitz liquid polish for all my metal polishing.But on the underside of the tailpeice I tried to use the Flitz polish to remove the rust,it didn't touch it.I was curious to know if any body knows how to remove the rust with out scrathing it .I appreciate any input .Thanks Rich.

Views: 1414

Reply to This

Replies to This Discussion

Check out the tips under Frank's main page - might be on the machine shop page - about using a low voltage DC source, a piece of iron/steel as a sacrificial anode, and baking soda as an electrolyte for rust removal.  I used his tip about a year ago to remove rust on a number items and it worked well.  For such a small item as you've got a 6V lantern battery would probably suffice.

 

Rob

The link is here - http://www.frets.com/HomeShopTech/QuickTricks/RustRemoval/rustremov...

 

Now, this is all well and good, but that rust is coming back, especially if the player, like me, seems to sweat rust food. What is the preventative cure that keeps the rust from coming back? It is possible to get something replated?

 

I'm very specifically thinking of the bridge plate on my mid 80's Japanese Telecaster. The serial number is there, and I would kinda feel grumpy about replating the thing if the number gets filled in. (I certainly don't know much about this...)

Get the product called CLR, available in hardware stores, Walmart, ect.

Soak the items for a while in this stuff then rinse with clear water and wipe dry. I've used it on rusty tuners and it does a great job. Doesn't hurt the metal, just removes the rust.

 

Jim

Thanks,Rob and Jim for the great ideas. Ill try them both, practice to get the feel.Thanks Rich.

I've used the low-voltage thing a few times, and -dang- it works!  It's kind of an ordeal to set-up so my best results have come from gathering a number of small parts at once and then make a party of it.  

The power source I've used is a cheap 120v-to-12v transformer from a garage sale (originally intended for bench repair of car radios) and it seems to do the trick. 

Hi Mike! What proportion of baking soda to water do you use? It's not very clear in Frank's article the amount of baking soda to use.
Not all that much... maybe a couple of tablespoons to a gallon of water. The solution seems to never "wear out" either... it gets a little disgusting-looking, but the rust keeps coming off. That's another reason I like to do a bunch of parts at once, to make good use of the solution and then dump it.
Thanks Mike! I'm all set up and ready to go. Gonna try some time this week-end.
Good deal Lee.... it's kinda' fun, like a "Mr. Science" project!  With the bonus of having derusted some stubborn stuff and making them nice again.  Good luck and have a ball.

Hello again. Yup, having fun. You're right, it's like a "Mr. Science" project (we're taking rust off a late 1800's calvary spur). I got my son (he's 11 years old) to help me get things set up, did safety procedures with him and we're having a great time asking and answering questions and watching the slime form on top of the water. Thanks for the replys!

Thought I'd post a pic of the spurs-one with the rust taken off and the other spur with the rust. After using doing the procedure, the rust did not wipe off. I used Kaboom to get the rest of the rust off and rinsed with water. Both spurs are now shiny and the rowels (the pointy wheels) also spin like they should.
Attachments:

Hi Lee, the spurs look great!  Did the "Mr. Science" project not take the rust off like we thought it may?

Wonder if has anything to do with how 'deep' the rust has colored the metal over x-number of years?

 I've got some old deeply-rusted scissors I found in a barn, probably 40 or so years old... maybe I should try the electro-chemical solution with them AND something recently-rusted to see if there's a difference?  Anyway, nice work! 

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service